General information

Mortar-like fertilizer

Pin
Send
Share
Send
Send


Mortar is a complex fertilizer, the use of which requires dissolution in water. Description: suitable for fertilizing when growing plants in open ground, hotbeds and greenhouses. Suitable for enriching the earth with nutrients when digging in the spring. It is an absolutely safe compound that does not contain chlorine. The use of fertilizer solution is universal. It is suitable for both closed and open ground.

The composition of the drug includes all the major nutritional components and trace elements. These elements are:

  • Zinc,
  • Magnesium,
  • Vitamins of group B,
  • Nitrogen in various forms,
  • Phosphorus,
  • Potassium.

Components are presented in salt form. The composition of the drug provides the following effects when using it:

  • Balancing feed crops when they are grown in a limited space for the root system,
  • Stimulating growth processes, which allows you to get a harvest in a shorter time. This effect is due to the increased concentration of nutrients,
  • Excellent effect when carrying out sheet top-dressings as all components are presented in the form which is easily acquired,
  • All components dissolve perfectly,
  • As part of a complete list of macronutrients and micronutrients required cultures.

This is an effective tool that is used for different types of dressings.

Read the same: Clematis varieties

What crops is suitable for Mortar?

What can be fertilized with Mortar? The drug is suitable for the following groups of plants:

  • Cereals,
  • Vegetable,
  • Fruit,
  • Berry,
  • Lawn,
  • Conifer and others.

There are different types of Mortar with different content and concentration of active ingredients. Under each culture should pick up your drug.

Features of use
When closed ground means is used through irrigation and sprinkling systems. There are several brands of Mortar, which are designed for different phases of development. This ensures the harmonious growth of plants throughout their development.

It is applicable to foliar dressings. This contributes to better absorption of all nutrients. This dressing is a spray with the use of the drug. It not only provides effective nutrition, but also allows you to vary the saturation of cultures of nutrients at different phases of their development.

Fertilizer is often used in open ground conditions. In this case, it is suitable for both spraying and root procedures. It is allowed to mix products with drugs that provide protection from diseases and pests. What is it for? It serves two purposes:

  • Reducing stress loads that are inevitable when using protective equipment
  • Reducing the cost of tillage.

All these nuances make the product versatile and required at the dacha.

Instructions for use
If this is a basic application, it should be done in the spring months when digging the soil. It will take 45-55 grams of substance per square. meter. Suitable for flower, potato, vegetable crops. Instruction:

  • The first feeding is carried out on the term, depending on the type of plant. If these are tomatoes, it is required to carry out the procedure in the formation of 5-6 leaf plates, cucumbers - 5-10 days after the emergence of seedlings, carrots and roots - 20-30 days after the sprouting,
  • The second feeding is carried out at the beginning of the set of fruits and the formation of root crops. On apt. meter will need 7-10 grams of composition,
  • For potato crops, the first feeding is planned at the beginning of flowering. Subsequent runs in the formation of tubers. On apt. a meter needs 10-12 grams,
  • For strawberries and fruit and berry species, the rate of application is 10-20 grams (strawberries) and 25-30 grams (other crops). The first application is made immediately after the snow has melted. The second procedure is implemented after flowering,
  • For fruit trees, the first procedure falls on the period of bud formation, the next - 10-15 days after flowering. Approximate dosage is 50-60 grams per square. meter.

For foliar fertilizing will need to prepare a working solution. It will need to dilute 20-40 g in a bucket of water. The procedure is carried out in cloudy weather. It is better to plan them for the beginning or end of the day. This will help protect the sheet plates from burns.

Its price is approximately 42 rubles per 50 grams.

Fertilizer Mortar - instructions for use

In order to enrich the soil with useful microelements, in the period of digging the soil, the solution is applied to the soil in the spring. The rate of the administered drug is calculated based on the rate of 50-55 g per 1 square meter.

To carry out root and foliar feeding plants need a working solution. For its preparation it is necessary to dissolve 10 g of fertilizer in 10 liters of clean, without any impurities, water. Fertilizing of seedlings should be carried out every 7 days, preferably in the morning or in the evening, flowers - every 14-15 days.

Top dressing of fruit trees is made twice - in the period of appearance of the leaves and after flowering, strawberries - before flowering. Vegetables are recommended to feed three times before harvesting.

When working with the solution, it is necessary to follow all the rules of personal hygiene, and after completing the feeding, hands and face should be washed with soap and water. The mortar is stored in a dry place out of the reach of children.

Characteristics of fertilizer Mortar

Trace elements that are part of the solution Mortar fertilizer are presented in salt form.

The fertilizer includes:

  • Zinc - 0.01%,
  • copper - 0.01%,
  • manganese - 0.1%,
  • molibden - 0,001%,
  • boron - 0.01%.

Depending on the brand of solution, the amount of nitrogen varies from 8 to 18%. It is equally contained in both nitrate and ammonia form. The phosphorus content of the solvent is from 5 to 18%, potassium - from 18 to 28%.

For carrying out the feeding of plants intended for closed ground, the Mortar fertilizer is applied using a sprinkler and watering system.

The combination of different grades of fertilizers contributes to the variation of feeding depending on the growing season of plants. So, if after planting tomatoes are lagging behind in their development, it is recommended to use Mortar Grade A. Immediately after removing the first fruits, it is best to use the B Grade M fertilizer.

If Mortar is used for foliar top dressings, then in this case the nutrients are actively absorbed by the plant. This method of fertilizer application is effective in different phases of crop growth.

In addition to the use of mortar in greenhouses, fertilizer is also widely used in open ground. It is used for both root and root dressings of agricultural and industrial crops.

Fertilizer of this type can be combined with other drugs designed to protect plants. This contributes to the removal of stress from the effects of chemical plant protection, as well as reducing labor costs in the processing of cultivated plants.

Fertilizer consumption rates Mortar

Useful properties of fertilizer Mortar

  • The use of fertilizer for growing crops in greenhouses ensures a balanced feed of their root system.
  • Mortar, having an increased concentration of useful substances, acts as a growth promoter, as a result of which it becomes possible to harvest an early harvest.
  • The drug is indispensable for foliar application, because it is easily absorbed through the leaves.
  • It is well dissolved in water.
  • Fertilizer goes well with drugs designed to protect against diseases and pests.

Mortar - universal fertilizer. It can be used for both root and foliar dressings. For root feeding of tomatoes, peppers and eggplant, use the following algorithm. 10-15 grams of fertilizer are diluted with a solution of 10 liters of water, 10-25 days after planting the seedlings the dose increases 10-25 grams per 10 liters of water. For foliar feeding the following algorithm. During the period of fruiting 25 grams per 10 liters of water and spray this solution every 7-10 days. The advantages of the drug: a balanced nutrition of plants when grown in a limited root space, the acceleration of plant growth due to the high content of nutrients, good efficiency when foliar application due to better digestibility of chemically pure nutrients, high solubility and a full set of macro - and micronutrients.

For root feeding of cucumbers and zucchini the following algorithm is used. Diluted 10-15 grams per 10 liters and made dressing after the formation of 5-6 leaves. Foliar nutrition occurs in a similar way. For root feeding of cabbage, beet, radish, beet and other root crops, the following algorithm is used. 10-15 grams of fertilizer are diluted in 10 liters of water and fed in 30-40 days from the date of sowing the seeds. For foliar feeding the following algorithm. Diluted 20-25 grams per 10 liters of water and sprayed during the formation of root crops. For trees, 30-35 grams per 10 liters per square meter is applied. Shrubs 20 grams per 10 liters per bush.

In the vegetable growing of the closed ground “Mortar” is used through sprinkling and irrigation systems. The presence of several brands allows you to vary the feeding depending on the phase of plant development. For example, when a tomato plant lags behind in growth after planting, Mortar Grade A is used. After collecting the first fruits, plant growth increases, so it is more expedient to use Grade B grades. The range of solution concentration fluctuations during watering is 0.1–0.5% depending on on growing conditions and plant age. The optimal concentration is 0.2%.

Mortar can be used for foliar dressings. In this case, the nutrients that are in water-soluble form are absorbed faster and better by plants, allowing you to quickly adjust the nutrition of plants at certain periods of growth. Currently, “Mortar” is widely used in open ground, where they are used for foliar fertilizing of vegetable, cereal, industrial and fruit crops. The results of field experiments determined their high efficiency when used in tank mixtures with pesticides on winter wheat, maize, apple orchards, vineyards.

Fertilizer application

If this is a basic application, it should be done in the spring months when digging the soil. It will take 45-55 grams of substance per square. meter. Suitable for flower, potato, vegetable crops.
First feeding performed on the term, depending on the type of plant. If these are tomatoes, it is required to carry out the procedure in the formation of 5-6 leaf plates, cucumbers - 5-10 days after the emergence of seedlings, carrots and roots - 20-30 days after the sprouting,
Second feeding carried out at the beginning of fruit set and the formation of root crops. On apt. meter will need 7-10 grams of composition,
For potato crops the first feeding is planned at the beginning of flowering. Subsequent runs in the formation of tubers. On apt. a meter needs 10-12 grams,
For strawberries and fruit and berry species application rate is 10-20 grams (strawberries) and 25-30 grams (other crops). The first application is made immediately after the snow has melted. The second procedure is implemented after flowering,
For fruit trees the first procedure falls on the period of bud formation, the next - 10-15 days later after flowering. Approximate dosage is 50-60 grams per square. meter.
For foliar dressing need to prepare a working solution. It will need to dilute 20-40 g in a bucket of water. The procedure is carried out in cloudy weather. It is better to plan them for the beginning or end of the day. This will help protect the sheet plates from burns.

Useful properties of Mortar

The following can be said about the beneficial properties of complex fertilizer Mortar:

  1. The use of fertilizer for growing crops in greenhouses ensures a balanced feed of their root system.
  2. Mortar, having an increased concentration of useful substances, acts as a growth promoter, as a result of which it becomes possible to harvest an early harvest.
  3. The drug is indispensable for foliar application, because it is easily absorbed through the leaves.
  4. It is well dissolved in water.
  5. Fertilizer goes well with drugs designed to protect against diseases and pests.

Mortar does not contain chlorine.

Use of the drug: methods and dosage

When applying Mortar to the soil before its spring digging per 1 sq.m. plot for planting will need from 45 to 55 g of fertilizer.

As feedings it can be used for many vegetable and berry crops, root crops, as well as for the processing of fruit trees.

To conduct tomato, eggplant and pepper root fertilizers, prepare a solution for 10 liters of water - 15 g of Mortar. Somewhere in 2-3 weeks after planting, increase the proportion (25 g per bucket of water). With the beginning of fruiting, they start to make leaf dressings with a solution in the same ratio, the frequency of dressings - once a week.

For root and leaf feeding zucchini and cucumbers use a solution of 10 g of fertilizer per 10 liters of water. The first dressing should be done after the appearance of 5 true leaves.

Root feed of cabbage, potatoes, beets, radish can be started one month after sowing / planting. To do this, 15 g of the drug is diluted in 1 bucket of water. As soon as the roots began to form, they start leaf processing (25 g of the preparation for a bucket of water).

The first fertilizer Mortar fruit trees can be carried out already with the beginning of the formation of buds. The solution is prepared in a ratio of 35 g of the drug per bucket of water (per 1 square meter). Secondly processed after flowering, when it will be two weeks. For feeding shrubs to 10 liters of water will need 20 g of Mortar.

Main composition and description

Mortar or Kristallin granular mineral fertilizer of white color. It belongs to the group of environmentally friendly substances, as it does not include chlorine. In the composition, in addition to potassium, phosphorus and nitrogen, in the form of sulfates are present:

And also vitamins from group B, which are useful for plants. Packing of Mortar is made in bags from 15 to 100 g, in dense bags of 25 kg or in plastic buckets from 1 kg and more. Marked with Mortar A and B with an index. The content of trace elements in percent according to the formula N – P – K (nitrogen, phosphorus, potassium):

  1. Mark A: 10–5–20.
  2. Mark A1: 8–3–28.
  3. Mark B: 18–0–18,
  4. Mark B1: 16–0–16.

Council All brands can be mixed or combined with other agrochemicals.

Mortar used for root and foliar fertilizing fruit trees and shrubs, berry and vegetable crops, as well as indoor plants. Used on an industrial scale in fields in tank mixtures for cereal and fodder. Allowed for closed and open ground. It is brought in by sprinkling or direct irrigation. It is possible to use in a dry form. For each culture, select the brand and calculate the desired dose.

Consumption rates, preparation of solutions

Basic solution Mortar produced in the spring along with digging the soil. On 1 square. m square will require 40-55 g of powder. Subsequent feeding is made taking into account the peculiarities of the development of culture.

For tomatoes, the first application is allowed after three pairs of leaf plates form on the plant. By the time it usually coincides with planting seedlings on permanent seats. The consumption rate of Mortar 10–15 g per 10 liters of water. During the formation of the fruit consumption increases to 25 g per 10 liters of water. The procedure is carried out weekly. In addition to tomatoes, peppers, eggplants, cucumbers, and zucchini are supported in the same way. For cabbage and root crops, the first watering is done a month after sowing the seeds (15 g per 10 l of water). In the future, the amount is increased to 25 g, watering the culture weekly.

Attention! Spraying the drug produced in the early morning or evening to avoid possible burns on the leaves.

For potatoes, the first application coincides with the beginning of flowering. During the active growing season, the bushes are fed at the rate of 10–12 g per 10 l of water.

Berry, fruit and berry (strawberries, strawberries, currants, garden raspberries and others) are fed for the first time after the snow cover disappears (10–15 g). After the cultures ottsvetut, make the second approach, increasing the dose to 15 g

For an orchard in early spring, the Solutionor fertilizer is applied to tree trunks using the dry method (30–35 g for 1 sq. M. Area). Working solution for spraying crown 20–40 g per bucket of water.

Results of use, drawbacks

Universal fertilizer Mortar suitable for green lawns near the house. After each mowing of the lawn, the grass is sprayed with a solution (20 g per 10 l). Garden decorative flowering plants respond well to the mineral composition. One watering at 3 weeks (25 g) is enough. For indoor plants 1-2 g per 1 liter of water no more than twice a month.

  • dissolves quickly in water
  • suitable for any culture
  • combined with other drugs
  • softens the effect of strong pesticides,
  • promotes full development, increases productivity.

Удобрение Растворин может применяться в любой климатической зоне, где есть сельское хозяйство. Срока годности вещество не имеет. При длительном хранении необходимо лишь следить, чтобы пакет не слеживался, периодически перекладывая упаковки. Место для хранения должно быть сухое, хорошо вентилируемое.

К недостаткам относят всего четыре возможных варианта комплекса Растворин. There may be a shortage of one element with a sufficient amount of another. Experienced gardeners compensate for this by mixing different brands with each other. The main purpose of Mortar - is seasonal supplements, but it is successfully introduced as a solo fertilizer for spring and autumn plowing.

Varieties

There are several types of fertilizer "Mortar":

Grade "A" contains NPK - complex (nitrogen, phosphorus, potassium) in the ratio 10: 5: 20. Mark "B" - 18: 6: 18. Number of other trace elements:

For seedlings it is recommended to use the “A” brand, after fruiting - the “B” brand.

Pin
Send
Share
Send
Send